Power Dividers and Combiners

DL347

Lumped element design allows for low insertion loss and high isolation. Design package accommodates SMA, N, BNC and TNC connectors. Design modification may be necessary for N connectors. 

FEATURES:

  • True 3-way Divider
  • Multi-Octave Bandwidth
  • Optimal Phase & Amplitude Balance
  • Standard SMA Connectors (N, BNC, TNC optional)

Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30'.
Temperature: Units designed to operate -55° to +85° C.

General Parameters:
Type: 3-WAY
Freq Range: 1-600 MHz
Insertion Loss: 0.8 dB
Isolation: 26 dB
VSWR1: 1.40:1
VSWR2: 1.40:1
Amplitude Bal: 0.2 dB
Phase Bal: 3 Degree
Input Power: 1 W
product-details ../
products