Power Dividers and Combiners

DL22030

The DL22030 broadband ferrite 2-way power divider is ideal for a wide range of wireless radio frequency microwave applications ranging from amplifier combining & receiver dividing to antenna splitting, and is suitable for networks from VHF to S band. Lumped element design provides for low loss and optimal isolation at incremental frequencies within the 20-3000 MHz band. Compact package size (1.25" x 0.7" x 0.5") allows this extremely lightweight component to fit into space limited locations.

FEATURES:

  • High Isolation
  • Low Loss
  • In-Line Configuration
  • Standard SMA Connectors (N, BNC, TNC optional)

Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30'.
Temperature: Units designed to operate -40° to +85° C.

 

General Parameters:
Type: 2-WAY
Freq Range: 20-3000 MHz
Insertion Loss: 2 dB
Isolation: 18 dB
VSWR1: 1.5:1
VSWR2: 1.5:1
Amplitude Bal: ±0.5 dB
Phase Bal: ±4 Degree
Input Power: 1 W
product-details ../
products