Directional Couplers

DCS2098

This series utilizes stripline circuit design in a small package while maintaining optimal electrical performance values. Frequency response is flat over the octave band. The design also permits usage as a bi-directional coupler, allowing the sampling of incident and reflected power. Design package accommodates SMA, N, BNC and TNC connectors. Design modification may be necessary for non-SMA connectors. 

Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors. Insertion loss excludes coupled power.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30'.
Temperature: Units designed to operate -55° to +85° C

General Parameters:
Type: Multi-Octave Couplers
Frequency: 0.5 to 2 GHz
Insertion Loss: 0.75 dB
VSWR 1: 1.50:1
VSWR 2: 1.50:1
Input Power: 50 W
Coupling: 20 dB
Coupling Variation: 0.5 dB
Directivity: 20 dB
Power Incident: 50 W
Power Reflected: 50 W
Peak Power: 1 kW
product-details ../
products